Tektronix TDS 350 Sprinkler User Manual


 
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć73
DIAg:RESUlt:FLAg? (Query Only)
Returns the pass/fail status from the last diagnostic test sequence execution.
Used the DIAg:RESUlt:LOG? query to determine which test(s) has failed.
Calibration and Diagnostic
DIAg:RESUlt:LOG?
DIAg:RESUlt:FLAg?
:
RESUlt
DIAg :
?
FLAg
PASS indicating that all of the selected diagnostic tests have passed.
FAIl indicating that at least one of the selected diagnostic tests have failed.
DIAG:RESULT:FLAG?
returns either PASS or FAIl.
DIAg:RESUlt:LOG? (Query Only)
Returns the internal results log from the last diagnostic test sequence execuĆ
tion. The list contains all modules and module interfaces that were tested
along with the pass/fail status of each.
Calibration and Diagnostic
DIAg:RESUlt:FLAg?
DIAg:RESUlt:LOG?
:DIAg :
?
LOG
RESUlt
<QString> in the following format:
<Status>,<Module name>[,<Status>,<Module name>...]
DIAG:RESULT:LOG?
might return :DIAG:RESULT:LOG ”pass––Processor,pass––Display,
pass––FP/Proc Interface,fail––Front Panel”
Group:
Related Commands:
Syntax:
Returns:
Examples:
Group:
Related Commands:
Syntax:
Returns:
Examples: