Filter
Top Products
TDS 310, TDS 320 & TDS 350 Programmer Manual
1Ć1
Getting Started
This section covers the following topics.
H Manual Structure describes the major sections in this manual.
H Installing the Option 14 Module describes how to install the communicaĆ
tions interface.
H Choosing an Interface describes the advantages and disadvantages of
GPIB and RSĆ232 interfaces.
H Setting Up Remote Communications describes setting up for remote
control including connecting the oscilloscope and setting the appropriate
front panel controls.
This manual includes the following sections.
Syntax and Commands
The Syntax and Commands section (Section 2) describes the structure of the
messages your program sends to the oscilloscope. Figure 1Ć1 shows a
syntax diagram and command parts as described in this section.
Comma
SAVe:WAVEform CH1,REF2
Header
Mnemonics
ArgumentsSpace
<wfm>
SAVe :
WAVEform
REF
<x><Space>
<Comma>
Command Parts
Syntax Diagram
Figure 1Ć1:ăThe Command Syntax Section Describes Common Message Elements
The Syntax and Commands section also describes each command used in
the oscilloscope. It explains the syntax of each command and provides
examples of how you might use it. The section arranges commands alphaĆ
betically and also provides a list by functional area (Figure 1Ć2).
Manual Structure