Filter
Top Products
Command Groups
Syntax and Commands
2Ć16
TableĂ2Ć11:ăMeasurement Commands
Header
Description
MEASUrement?
Returns all measurement parameters
MEASUrement:GATING Set or query measurement gating
MEASUrement:IMMed? Return immediate measurement paĆ
rameters
MEASUrement:IMMed:SOUrce[1] Channel to take measurement from
MEASUrement:IMMed:TYPe The measurement to be taken
MEASUrement:IMMed:UNIts? Return measurement units
MEASUrement:IMMed:VALue? Return measurement result
MEASUrement:MEAS<x>? Return parameters on measurement
MEASUrement:MEAS<x>:
SOUrce[1]
Channel to take measurement from
MEASUrement:MEAS<x>:STATE Turn measurement display on or off
MEASUrement:MEAS<x>:TYPe The measurement to be taken
MEASUrement:MEAS<x>:UNIts? Units to use for measurement
MEASUrement:MEAS<x>:VALue? Measurement result query
MEASUrement:METHod Method for calculating reference
levels
MEASUrement:REFLevel? Returns reference levels
MEASUrement:REFLevel:
ABSolute:HIGH
The top level for risetime (90% level)
MEASUrement:REFLevel:
ABSolute:LOW
The low level for risetime (10% level)
MEASUrement:REFLevel:
ABSolute:MID
Mid level for measurements
MEASUrement:REFLevel:
METHod
Method to assign HIGH and LOW
levels: either % or absolute volts
MEASUrement:REFLevel:
PERCent:HIGH
The top level for risetime (90% level)
MEASUrement:REFLevel:
PERCent:LOW
The low level for risetime (10% level)
MEASUrement:REFLevel:
PERCent:MID
Mid level for measurements