Tektronix TDS 350 Sprinkler User Manual


 
Command Syntax
Syntax and Commands
2Ć6
RSĆ232 End of Message Terminators Ċ may be a CR (carriage return),
LF (line feed), CRLF (carriage return followed by a line feed), or LFCR (line
feed followed by a carriage return). When receiving, the oscilloscope accepts
all four combinations as valid input message terminators regardless of the
currently selected terminator. When a combination of multiple characters is
selected (CRLF or LFCR), the oscilloscope interprets the first character as the
terminator; the oscilloscope interprets the second character as a null comĆ
mand.
Cursor Position Mnemonics
When the oscilloscope displays cursors, commands may specify which
cursor of the pair to use.
Symbol Meaning
POSITION<x> A cursor selector; <x> is either 1 or 2.
Measurement Specifier Mnemonics
Commands can specify which measurement to set or query as a mnemonic
in the header. The oscilloscope can display up to four automated measureĆ
ments with each displayed waveform. The displayed measurements are
specified in this way:
Symbol Meaning
MEAS<x>
A measurement specifier; <x> is either 1, 2, 3,
or 4.
Channel Mnemonics
Commands specify the channel to use as a mnemonic in the header.
Symbol Meaning
CH<x>
A channel specifier; <x> is either 1 or 2.
Math Waveform Mnemonics
Commands can specify the mathematical waveform to use as a mnemonic in
the header.
Symbol Meaning
MATH<x>
A math waveform specifier; <x> is 1.
Constructed
Mnemonics