Tektronix TDS 350 Sprinkler User Manual


 
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć125
MEASUrement:REFLevel:METHod
Specifies which reference levels are used for measurement calculations. This
command is equivalent to setting the levels in the Reference Levels side
menu.
Measurement
MEASUrement:REFLevel:METHod { ABSolute | PERCent }
MEASUrement:REFLevel:METHod?
METHod
MEASUrement :
REFLevel
:
<Space>
?
ABSolute
PERCent
ABSolute specifies that the reference levels are set explicitly using the
MEASUrement:REFLevel:ABSolute commands. This method is useful when
precise values are required.
PERCent specifies that the reference levels are calculated as a percent
relative to HIGH and LOW. The percentages are defined using the MEASUreĆ
ment:REFLevel:PERCent commands.
MEASUREMENT:REFLEVEL:METHOD ABSolute
specifies that explicit userĆdefined values are used for the reference
levels.
MEASUREMENT:REFLEVEL:METHOD?
returns either ABSolute or PERCENT, indicating the reference levels
used.
Group:
Syntax:
Arguments:
Examples: