Tektronix TDS 350 Sprinkler User Manual


 
Command Descriptions
Syntax and Commands
2Ć130
PASSWord (No Query Form)
Enables the *PUD and NEWpass set commands. Sending PASSWord without
any arguments disables these same commands. Once the password is
successfully entered, the *PUD and NEWpass commands are enabled until
the oscilloscope is powered off, or until the FACtory command, the PASSĆ
Word command with no arguments, or the *RST command is issued.
To change the password, you must first enter the valid password with the
PASSWord command and then change to your new password with the NEWĆ
pass command. Remember that the password is case sensitive.
Miscellaneous
NEWpass, *PUD
PASSWord[<QString>]
<QString>
PASSWord
<Space>
<QString> is the password and can include up to 10 characters. The factory
default password is XYZZY"and is always valid.
PASSWORD ”XYZZY”
Enables the *PUD and NEWpass set commands.
PASSWORD
Disables the *PUD and NEWpass set commands. You can still use the
query version of *PUD.
Group:
Related Commands:
Syntax:
Arguments:
Examples: