Filter
Top Products
Sequence
Part to remove
16
’ Rotor assembl)
Description
(1) Fit the rotor puller to th2 rotor
shaft. and drive it into place to
Precautions
! Necessary tools
’ Rotor puller
remove the rotor from the engine
shaft.
Plastic hammer
1; Plug cap (1
j
Remove the plug cap from th2
spark plug in advance.
(3) Remove the clamp of the high-
voltage power cable.
18
Front housing
and center
baffle
(1
j
Remove the front housing and 1 Omm box spanner
center baffle from the engine
main bearing. b) removmg thrze
I
j
M6 x Xmm bolts and one M5
x 55mm bolt. (See Fig. 11.8.) t
CENTER BAFFL
FRO
Fig. 12-7
Fig. 128
Sequence
Part to remove
Description
19
! ~
Air cleaner
(1) Remove the center screw of the
air cleaner cover to remove the
cleaner cover. filter element. and
element retainer.
(2) Remove the M5 screw at the lower
right inside the element chamber.
(3) Remove tvvo M6 flange nuts
clamping the air cleaner and the
carburetor together to remove the
air cleaner.
Precautions
Necessary tools
i?
;s Minus screw-
driver
A
\fi Plus screw-
driver
i 1Omm box
spanner
! (See Fig. 12-9.)
I
AIR CLEANER
ELEMENT & ELEMENT
*
RETAINER
ELEMEN/T
?
Al R ‘CLEANER
COVER
FIQ. 10-9
-35-