Filter
Top Products
12-3 DISASSEMBLY SEQUENCE
I
I
Sequence Part to remove I
Description
Precautions
Necessary tools
1
Side cover (Lj
(1 j Remove both the left and right
!
2 PlUj
screw-
and (Rj
co\-2rs. by taking out eight 31-C
driver
I
flang2 screws.
I
-I
Couplsrs (dis-
1 (1) Disconnect th2 (6Pj coupler
of
Pull them under
connection)
the generator from the other (6P) while pressing
extending from the control panel.
1 down the retainer
claws.
622
Fig. 1 Z-2.)
!
3 ’ Choke cab12
(1) Set the engine control to STOP.
rs Minus
I
and remove the screw from the
screw-driver
I
tip of the choke cable to dis-
connect the choke cable from
the dial plate.
I
(2)
Disconnect the outer cable of the
1 1Omm box spanner
choke cable from the fuel tank
bracket.
(3) Loosen the M4 screw of the
!
carburetor choke lever swivel to
13 Plus screw-
driver
pull out the inner Loire from the
choke cable.
4
Fuel line
(1) Hold thz fuel line clamp inserted
/
Be careful not to
Pliers
inside the felt strainer using pliers,
’
and pull it backward to remove
damage the hose. :
the fu21 line from inside the
I
strainsr.
I
5
’ Fuel tank
handle
(1) Push up the end of the cover
I
fitted to the handle with finger.
r (2) Pull out the rubber tube use; as
the air vent pipe.
a (3) Remove two bolts (tank). and
1Omm box
remove the handle.
I
I
I spanner
Fig. 12-2
-32-