Filter
Top Products
-
*-
12. DISASSEMBLY and ASSEMBLY
12-1 PREPARATION and PRECAUTIONS
1) Be sure to remember the locations of individual parts when disassembling the generator so that the generator can be
reassembled correctly. Tie tags noted with the necessary information to facilitate easier and smoother reassembly.
2) For more convenience, divide the parts into several groups and store them in boxes.
3) To prevent bolts and nuts from being misplaced or installed incorrectly. place them temporarily back at their original
positions.
4) Handle disassembled parts with care; clean them before reassembly using a neutral cleansing fluid.
5)
Us2
all disassembly/assembly tools properly, and use the right tool for each specific job.
12-2 SPECIAL TOOLS for DISASSEMBLY and ASSEMBLY
-
Fig. 12- 1
b
\o
3
(D
No.
Tool No. ;
Name of tool
1
2309500107
Valve spring retainer
1
,
Description
For disassembling and assembling the intake
and exhaust valves
2
2309500207
Valve guide puller To pull out the valve guide
3
3589500107 :
Rotor puller To pull out the rotor
Table 12-l
-31-