Multiquip SG1400C3-55748 Portable Generator User Manual


 
PAGE 38 — SG1400C3 STUDIO GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (02/15/12)
MAINTENANCE
Use Table 14 as a general maintenance guideline when servicing your engine. For more detail engine maintenance
information, refer to the engine owner’s manual supplied with your engine.
Table 14. Engine Maintenance Schedule
DESCRIPTION OPERATION
INTERVAL
DAILY
3
250 HOURS
OR
3 MONTHS
3
500 HOURS
OR
6 MONTHS
1,2,3
1000 HOURS
OR
1 YEAR
3
2000 HOURS
OR
2 YEARS
2,3
5000 HOURS
OR
4 YEARS
3
Air Intake Piping Check X
Engine Lubricating Oil Level Check X
Air Tank and Reservoirs Drain X
Crankcase and Breather Tube Inspect X
Engine Coolant Level Check X
Fuel -Water Separator Drain X
Air Cleaner Restriction Check X
Air Compressor
Mounting Hardware
Check X
Charge-Air Cooler Check X
Charge-Air Piping Check X
Radiator Hoses Check X
Air Intake Piping Inspect X
Fan, Cooling Check X
Coolant Level Check X
Drive Belts Check X
Engine Coolant - Antifreeze Check X
Fuel Filter (Spin-On Type) Replace X
Lubricating Oil and Filters Change X
Radiator Pressure Cap Check X
Cooling Fan Belt Tensioner Check X
Fan Hub, Belt-Driven Check X
Air Compressor Discharge Line Check X
Cooling System Drain X
Vibration Damper, Rubber Check X
Vibration Damper, Viscous Check X
Overhead Set Adjust X
1. The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle
weight, and idle time.
2. Antifreeze check interval is every oil change or 500 hours or 6 months, whichever occurs first. The operator must use heavy-
duty, year-round antifreeze that meets the chemical composition of ASTM D6210. The antifreeze change interval is 2 years
or 2000 hours whichever occurs first. Antifreeze is essential for freeze, overheat, and corrosion protection.
3. Follow the manufacturer’s recommended maintenance procedures for the starter, alternator, generator, batteries, electrical
components, exhaust brake, charge air cooler, radiator, air compressor, air cleaner, refrigerant compressor, and fan clutch.