Filter
Top Products
39
Section 4: Options & Accessories
11/11/12
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
Table of Contents
Safety Guard Options
!
DANGER
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety guards is
strongly recommended when cutting. Specifically, double row
chain guards should be used along highways and in areas
where people may be present.
!
DANGER
Safety shields will not stop all objects. Therefore, Land Pride
recommends using extreme caution when cutting in public
areas. Stop blade rotation if bystanders come within several
hundred feet.
Land Pride offers four types of safety guards to best suit
your application: rubber skirt guards, single row
chainguards, double row chainguards, and double row
chainguards with cable.
• Rubber skirt guards are designed for light duty
applications.
• Single row chainguards are constructed with a single
row of hanging chain links. They can withstand harsher
applications than rubber skirts.
• Double row chainguards are constructed with two
staggered rows of hanging chain links. The second row
provides an additional barrier for stopping thrown
objects.
• Double row chainguards with cable are constructed
with a double row of hanging chain links and a steel
cable threaded through the bottom hanging chain links.
This restricts the hanging links from spreading apart
when hit by solid objects.
Rubber Guards
330-513A Front Rubber Safety Guards
330-525A Rear Rubber Safety Guards
Single Row Chain Guards
330-512A Front Single Row Chainguards
330-524A Rear Single Row Chainguards
Double Row Chain Guards
330-514A Front Double Row Chainguards
330-526A Rear Double Row Chainguards
Double Row Chain Guards with Cable
330-515A Front Double Row Chainguards with Cable
330-527A Rear Double Row Chainguards with Cable
Low Lift Blade Accessory
Land Pride recommends low lift blades when cutting tall
Johnson Grass and brush as they provide a better quality
of cut when cutting these materials. See Figure 5-6 on
page 42 for Low Lift Blade Part Numbers.
Tire & Axle Options
Land Pride offers five different tire options and four axle
arrangements to best suit your application:
• Laminated tires: They are constructed of laminated
layers of solid rubber that will never go flat.
• New tires: They are available in foam filled and air
filled. Both are built tough to withstand the rugged use
a cutter receives and to provides a smoother ride when
transporting. Foam filled tires won’t go flat.
• Used aircraft tires: Available in two sizes, they are built
tough to withstand the rugged use a cutter receives
and to provide a smoother ride when transporting.
• 5- Wheel standard axle arrangement: Four on
transport axle and one wing axle.
• 6 - Wheel standard axle arrangement: Four on
transport axle and two on wing axle.
• 5 - Wheel tandem axle arrangement: Four on transport
axle and one non tandem on wing axle.
• 6 - Wheel tandem axle arrangement: Four on transport
axle and two on the wing axle.
Hitch Options
The cutter is factory supplied with the standard clevis
hitch. Other optional hitches are available. See “Hitch
Types” on page 13 for description of all hitches.
330-225A Standard Clevis Hitch
330-333A Bar-Tite Hitch (Optional)
330-335A Ball Hitch (Optional)
330-334A Pintle Hitch (Optional)
334-045A LP Performance Hitch (Optional)
Selector Control Valve Kit
312-316A 2-Way Selector Valve Kit
This kit is for tractors needing an additional duplex outlet.
It converts one duplex outlets into two with a control
valve. A selector switch on the control valve selects which
of the two duplex outlets is operational with the tractor
hydraulic control lever.