Filter
Top Products
19
Section 1: Assembly & Set-up
11/11/12
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
Table of Contents
6. See "WARNING" on page 18. Once you are sure the
area is clear and you are safely positioned, manually
unfold the wing until it starts to fall on its own. The
wing should fall slowly as the hydraulic line is orificed
to control the fall.
Wing Folding Cylinder & Plumbing
Refer to Figure 1-14:
1. Hydraulic cylinder 3 1/2" x 8" x 1 1/4" rod
2. Orifice elbow, 1/16" x 9/16" MJIC x 3/4" MORB
3. 3/8" Hydraulic hose, 189" long x 9/16" FJIC x 3/4" MORB
4. Quick disconnect poppet type coupling, 3/4" MORB male
5. Red hand grip for cylinder extension
6. Red hand grip for cylinder retraction
7. Hand grip adapter, 3/4MORB x 3/4FORB
Rephasing Cylinders & Plumbing
Refer to Figure 1-15:
1. Rephasing hydraulic cylinder 3 1/2" x 8" x 1 1/4" rod
2. Rephasing hydraulic cylinder 3 1/4" x 8" x 1 1/4" rod
3. Straight adapter 3/4 MORB x 3/4MJIC
4. Elbow, 3/4" MJIC x 3/4" MORB
5. Quick disconnect poppet type coupling, 3/4" MORB male
6. 3/8" Hydraulic hose, 168" long x 3/4" MORB x 3/4" FJIC
7. 3/8" Hydraulic hose, 84" long x 3/4" FJIC
8. 3/8" Hydraulic hose, 249" long x 3/4" FJIC x 3/4" MORB
9. Black hand grip for cylinder extension
10. Black hand grip for cylinder retraction
11. Hand grip adapter, 3/4MORB x 3/4FORB
Wing Folding Cylinder and Plumbing
Figure 1-14
Re-phasing Deck Lift Cylinders and Plumbing
Figure 1-15
30230
30229