A SERVICE OF

logo

Open as PDF
next previous
Endcaps 21
E-EQ-MX3CERG-G-ARC MX3-CE Reference Guide
COM Port Switching
Figure 1-19 Endcap
1 DC Power Jack 3 Com 1 Port
2 Com 3 Port 4 Audio Jack
The COM 2 port is always the IR port on the back of the MX3-CE, regardless of the type of
endcap installed.
On the Standard Range Scanner / Serial Port endcap COM 3 is the Integrated Scanner port.
On the Dual Serial Port endcap the COM1 port is the serial port on the right side of the endcap
when the display is facing you.
The process used to enable the MX3-CE COM1 port for use with a tethered scanner has three
steps:
Note: Use the scanner control panel to setup using both the integrated scanner and a tethered
scanner.