Appendix D Barcodes 171
E-EQ-MX3CERG-G-ARC MX3-CE Reference Guide
Length Within Range
This option decodes a code type within a specified minimum and maximum range. For example,
when you want to scan only Codabar symbols containing between 4 and 12 characters, scan the
“Codabar Length Within Range” barcode and then “0”, “4”, “1” and “2” barcodes.
To begin setting lengths within a range, scan this barcode:
Codabar - Length within Range
Next, scan numeric barcodes that correspond to the desired value using the “Keypad Number
Symbols” at the end of this chapter. Single digit numbers must have a leading zero. If you wish to
change your number selection, scan Cancel on the “Keypad Number Symbols” page.
Any Length
This option decodes Codabar barcodes containing any number of characters.
To set any length, scan this barcode:
Codabar - Any Length
