A SERVICE OF

logo

Open as PDF
next previous
22 Programmable Buttons
MX3-CE Installation and Operator’s Guide E-EQ-MX3CEOGWW-A-ARC
Programmable Buttons
The buttons to the left and right of the display can be programmed by the System Administrator to
perform the following functions:
Scan Pressing this key activates the integrated laser scanner, if installed. See the section titled
"Scan Key Function."
Enter Pressing this key confirms a forms entry or transmits information. See the section titled
"Enter Key Function."
To edit the button parameters, select Start / Settings / Control Panel / Scanner. Change the
parameter values and tap OK to save the changes.
See the "MX3-CE Reference Guide" for complete instructions.
The default setting for the right button is Enter. The default setting for the left button is Scan.
When the MX3-CE does not have an integrated scanner, both buttons function as Enter keys.
Figure 20 Programmable Buttons (Scan / Enter)