A SERVICE OF

logo

Open as PDF
next previous
44 Physical Controls
MX3-CE Reference Guide E-EQ-MX3CERG-G-ARC
Button Settings
To edit the button parameters, select Start | Settings | Control Panel | Scanner. Change the
parameter values and tap OK to save the changes.
Main COM1 COM2 COM3
Scanner Control
Keys
disabled
Scan
Enter key
Tab key
Virtual key
Right Scan Key
Left Scan Key
Figure 2-8 Left and Right Scan Button Programming
The default setting for the right button is Enter. The default setting for the left button is Scan.
When the MX3-CE does not have an integrated scanner, both buttons default to Enter keys and
the Scan selection is greyed out.
Each button can be setup as:
• Disabled – no response when pressed
• Scan – initiate a barcode scan sequence
• Enter Key
• Tab Key
• Virtual Key (default values F20 and F21)