A SERVICE OF

logo

Data Entry 27
E-EQ-MX3CERG-G-ARC MX3-CE Reference Guide
Scanner Entry
Read all cautions, warnings and labels before using the laser
scanner.
To scan with the laser barcode reader, point the laser window towards a barcode and press the
Scan button. A red laser beam strikes the barcode. Align the red beam so that the barcode is
centered within the beam.
The laser beam must cross the entire barcode. Move the MX3-CE towards or away from the
barcode so that the barcode takes up approximately two-thirds the width of the beam. Following a
barcode scan and read the SCNR LED turns green and the MX3-CE beeps, indicating a successful
scan.
Beeps are heard during the barcode reading. The laser and SCNR LED automatically turn off after
a successful or unsuccessful read. The scanner is ready to scan again when the Scan key is
pressed.