A SERVICE OF

logo

Open as PDF
next previous
24 IR Port
MX3-CE Installation and Operator’s Guide E-EQ-MX3CEOGWW-A-ARC
IR Port
Figure 22 IR Port (COM 2)
The InfraRed (IR) port provides a means of transferring information to a device with a similar port
and the proper software. The IR port can be used to communicate with printers or a host computer
with the use of an adapter.
The IR Port is specified as COM 2 and is a bi-directional half-duplex infrared port. It supports the
Slow IrDA (Infrared Data Access) PHY Layer standard that allows communication speeds up to
115k baud.
When sending data through the IR port to another MX3-CE's IR port, make sure both units are in
close proximity to each other. The IR operating envelope has a distance range of 2 cm (.79 inches)
to 1 meter (3.2 feet) with a viewing angle of 30 degrees.
See the "MX3-CE Reference Guide" for complete instructions.