Display 49
E-EQ-MX3CERG-G-ARC MX3-CE Reference Guide
Touchscreen
The touchscreen provides a means of inputting information into the MX3-CE by touching the
screen using the LXE approved stylus (the Passive Pen – see Chapter 1 section titled
“Accessories.”)
Touchscreen operation is not affected by Display Backlighting.
Touchscreen operation is affected by the Display mode. If the display is off, a touch to the display
will turn on the display but no touch data will be sent to the running application until the next
touch.
Cleaning the Glass Display/Scanner Aperture
Keep fingers and rough or sharp objects away from the scan aperture and display. If the glass
becomes soiled or smudged, clean only with a standard household cleaner such as Windex(R)
without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based
cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free
cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.
Lint/particulates can be removed with clean, filtered canned air.
