Configuring Custom Tray Menu Settings
Printer Tasks 3-11
Printer Tasks
3. Press Ǡ to get a list of paper sizes for this tray, as shown in Figure 3-15.
Figure 3-15 Paper size selections
4. Press Ĭ to move to CUSTOM.
5. Press Select to define this CUSTOM paper size selection (Figure 3-16).
Figure 3-16 Paper size (continuation of selections)
6. Press Online to return to the Main Screen.
Configuring Custom Tray Menu Settings
You must first interpret your paper dimensions into settings the printer can understand.
Basically, you must accurately measure your paper’s width and height (also called length)
using standard inches (inches) or millimeters (mm), and converting the numbers into printer
units.
For example, using a 5 x 8 inch card:
1. The card is printed with the short side (5 in) as the leading edge. The menu setting for
the leading edge is width.You could also select the long side as the width.
2. The 8 inch side is height. You could also select the short side as the height.
Online
tray1size =
Online
LEGAL
LEDGER
EXECUTIVE
A4
A5
LETTER
Select
Contination arrows
Online
tray1size
Online
JISB4
JISB5
Select
A3
CUSTOM
