A SERVICE OF

logo

Open as PDF
next previous
Periodic Cleaning (When Replacing Drum)
5-10 Maintenance
LED Array Area
To clean the LED Array:
1. Use the supplied cleaning cloths to wipe up any toner or dust off the outside of the LED
array. Clean all the way across the LED array. Figure 5-10 shows the LED array and
illustrates the cleaning procedure.
Caution Be careful to avoid contacting the developer unit roller on the right side of the area,
as this could damage the developer.
Figure 5-10 Cleaning LED Array
2. Install the new drum assembly, as described in “Drum Kit - Replacing Drum and
Transfer Assembly” on page 4-18.