A SERVICE OF

logo

Clearing Paper Output Jams
3-48 Printer Tasks
Separating the HCO and Printer
To separate the HCO from the printer:
1. The printer physically connects to the HCO with a connecting pin, which fits into the
corresponding positioning hole on the HCO. See Figure 3-68.
Figure 3-68 Separating HCO and printer
2. Figure 3-69 shows detailed look at the connecting pin and the positioning hole.
Figure 3-69 Printer connecting pin and HCO positioning hole configuration
Connecting
Pin
Bracket B Bracket A
Positioning
Hole
Printer
HCO
Pin
Printer
Push HCO
left to disengage
Unscrew Bracket A
Pin
Pull HCO away from printer