A SERVICE OF

logo

Removing and Installing the Paper Trays
3-2 Printer Tasks
Removing and Installing the Paper Trays
1. Pull out the standard tray as shown in Figure 3-1.
Figure 3-1 Pulling out Standard Tray
2. Install the standard tray by sliding it back in.
3. Pull out the custom tray as shown in Figure 3-3. Angle the tray up slightly until it
disengages the tray guides on either side of the printer, then remove the tray as if it were
a standard tray.
Figure 3-2 Pulling out Custom Tray
Tray
LTR
LTR
LTR