A SERVICE OF

logo

Replacing Developer
4-14 Ordering and Replacing Consumables
7. Open the developer fill flap, as shown in Figure 4-17.
Figure 4-17 Opening the Developer Fill Flap
Caution Never reinstall used developer. Doing so may result in poor print quality.
8. Line up the guide pins on the new developer bottle with the guide pin openings on the
developer fill. Insert and turn the developer bottle clockwise 180
°
to start filling, as
shown in Figure 4-18.
Figure 4-18 Filling the Developer and tapping the Developer Bottle
Developer fill flap
Developer bottle
Guide pin
Guide pin slot
Developer bottle