A SERVICE OF

logo

Open as PDF
next previous
HCI Pick Roller Kit - Replacing the HCI Pick Rollers
Ordering and Replacing Consumables 4-43
Consumables
2. Open the HCI door, press the HCI top button to lower the shelf, and then remove any
paper as shown in Figure 4-56. The printer must be powered on and the HCI must be
connected to the printer for the HCI top button to lower the shelf.
Figure 4-56 Opening the HCI
3. Locate the back of the HCI and carefully remove the retaining springs providing tension
to the lower roller assembly, as shown in Figure 4-57. Notice how these springs are
attached to the lower roller assembly.
Figure 4-57 HCI Rear and Lower Roller Assembly Springs
LTR
LTR
LTR