A SERVICE OF

logo

Setting Standard Paper Sizes
Printer Tasks 3-7
Printer Tasks
Setting Standard Paper Sizes
Use the PapSize setting to configure the printer for the size of paper installed in each paper
source.
Note The D640 does not detect paper size. You must visually check each drawer to verify
that it contains the correct paper.
1. At the Main Screen, press PapSize. Figure 3-9 appears.
Figure 3-9 PapSize
2. Verify that all trays have the correct paper size loaded.
3. Select the drawer using
Ĭ. The selection is highlighted (for example, tray1size).
4. Press
Ǡ and a list of sizes appears on the Control Panel (Figure 3-10).
Figure 3-10 Paper Size Selection
Online
PapSize
Online
tray1size =LETTER
tray2size =LETTER
tray3size =LETTER
Online
tray1size =
Online
LEGAL
LEDGER
EXECUTIVE
A4
A5
LETTER
Select
Contination arrows