A SERVICE OF

logo

Open as PDF
next previous
Adjusting Paper Path Alignment
6-20 Advanced Topics
Setting Alignment Values
You will now calculate and enter the new alignment values into the Control Panel.
1. Calculate the new values.
2. For each adjustment value, add the two numbers and write the new value, as shown in
Figure 6-13. If the adjustment value you read off the sheet was 0, no new setting is
required for that tray.
Figure 6-13 Adjustment values entered into work sheet
-6
+3
-2
-2
0
No adjustment necessary
+1
-2
+7
+7
+14
+8
+15