Filter
Top Products
Service Manual
Greensmaster
®
3100/3050
Preface
This publication provides the service technician with
information for troubleshooting, testing, and repair of
major systems and components on the
Greensmaster 3100 and 3050.
REFER TO THE TRACTION UNIT, CUTTING UNIT
AND ACCESSORY OPERATOR’S MANUALS FOR
OPERATING, MAINTENANCE AND ADJUSTMENT
INSTRUCTIONS. Space is provided at the end
of Chapter 2 in this publication to insert the Operator’s
Manuals and Parts Catalogs for your machine. Replace-
ment Operator’s Manuals are available by sending com-
plete Model and Serial Number of traction unit and
cutting unit to:
The Toro Company
8111 Lyndale Avenue South
Minneapolis, MN 55420
The Toro Company reserves the right to change product
specifications or this publication without notice.
This safety symbol means DANGER, WARN-
ING, or CAUTION, PERSONAL SAFETY IN-
STRUCTION. When you see this symbol,
carefully read the instructions that follow.
Failure to obey the instructions may result in
personal injury.
NOTE: A NOTE will give general information about the
correct operation, maintenance, service, testing or re-
pair of the machine.
IMPORTANT: The IMPORTANT notice will give im-
portant instructions which must be followed to pre-
vent damage to systems or components on the
machine.
© The Toro Company - 1991, 1998, 2002, 2004, 2005
Part No. 92784SL, Rev. E