Filter
Top Products
ASSEMBLY
Assembly Section 3-10
© 2004 Alamo Group Inc.
SR10M/SR15M 10-01
ASSEMBLY
CHAINGUARDS (EXTRA) OR RUBBER DEFLEC-
TORS (STANDARD)
Fasten the front Chainguards or Rubber Deflector
(Figure 14) to the Center Section and Wing Sections
with bolts (1) and locknuts (3) through the deflector
bracket (#2).
Fasten the rear Chainguards (Figure 15) or Rubber
Deflector to the Center Section and Wing Sections
with bolts (1) and locknuts (3).
FIGURE 14. Front Deflectors (Standard)
REAR CENTER SECTION REAR RIGHT WING SECTION
FIGURE 15. Rear Chainguards Attachment (Extra)
1
1
3
3
HOSE BRACKET ATTACHMENT
Hose Brackets are attached in the front and rear of the mower. The Front Hose Bracket bolts to the tongue lug
brackets. The Rear Hose Bracket mounts to the center hydraulic suspension spring bracket. FIGURE 13.
FIGURE 13. Hose Bracket Attachment
1
2
3