Filter
Top Products
ASSEMBLY
Assembly Section 3-5
© 2004 Alamo Group Inc.
SR10M/SR15M 10-01
ASSEMBLY
WING AXLE ATTACHMENT- MECHANICAL LEVEL LIFT
Attach the Wing Axles (1) to the Wing Sections (2) with 1 x 7 bolts (3), flatwashers (4), and locknuts (5) on
outboard side and 1 x 4-3/4 bolt (6), and locknuts (5) on the inboard side. FIGURE 6.
FIGURE 6. Wing Axle Attachment
WING SECTIONS ATTACHMENTS
While the Center Section is still solidly blocked, attach the Wing Sections (1) in the horizontal plane. Using
Hinge Pins (2), attach the Right and Left Wing Sections to the Center Sections.
NOTE: Wing Sections may require slight lifting after the Hinge Pin is started to aid pin installation.
Lock the Wing Sections in place with the Hinge Pins. Insert 5/16 x 1-1/2 bolt (3) and locknut (4) at the end of
each of the Hinge Pins and tighten securely. FIGURE 5.
FIGURE 5. Wing Sections Attachments
1
2
3
5
6
5
R 11-11-99