Filter
Top Products
OPERATION
Operation Section 4-20
OPERATION
© 2004 Alamo Group Inc.
SR10M/SR15M 10-01
Ensure the tractor PTO master shield is in place,
lowered and in good condition.
Ensure each mower slip clutch shield is secured
in place and in good condition.
Ensure the driveline slip clutches are properly
adjusted and the friction plates are not frozen
together. Reference the Maintenance Section for
proper slip clutch maintenance.
Ensure chain guards and/or rubber deflectors are
in position and not damaged. Replace worn,
broken, and missing sections immediately.
Ensure the driveline integral shields are in good
condition and rotate freely.
Inspect that all bolts and screws are in position
and are properly torqued.
Ensure the mower hitch is securely attached to
the tractor drawbar with a proper size bolt and
secured nut.
Ensure that a properly rated safety tow chain is
equipped securing the mower to the tractor.
Check that the main driveline is securely attached
to the tractor and the locking collar is seated in
the groove of the PTO shaft.
Ensure the divider drivelines are secure at both
ends
Ensure that the Manual Canister is secured to the
mower with the Operator’s Manual inside.
Ensure all decals are in place and legible.
Replace missing, worn, and unlegible decals.
NOTE: The mower Operator’s Manual and affixed
Decals contain important instructions on the safe and
proper use of the mower. Maintain these important
safety features on the mower in good condition to
ensure the information is available to the operator at
all times.