Filter
Top Products
LBI-39128 OPERATION
26
Table 7 - PMU Option Parameters
PARAMETER
DESCRIPTION
SITE CONTROLLER
COMPUTER
PERSONALITY PROMS
SYSTEM MANAGER
SITE DATABASE
PMU
ACTIVE
CONFIGURATION
Bit map parameter set that
enables the PMU option on
a per-channel basis
(must also be enabled
on a site-wide basis).
PMU Enable
(Channel Data screen)
Must be enabled here
(set to Y for enabled).
Single bit parameter that
enables the PMU option on
a site-wide basis
(must also be enabled
on a per-channel basis).
Power Monitor Unit
(PMU screen)
Must be set to On
(without System Manager).
Should be set to On
(w/wo System Manager).
Power Monitor Unit
Enabled
(Site/Device Site Test
Parameters screen)
Can be enabled here.
(set to Y for enabled)
Single bit parameter that
identifies the PMU model.
PMU Model
(PMU screen)
Must be set to New-8860.
Single parameter that
sets the lower power limit
(in watts) for transmitter
output power.
PMU Power Levels
(PMU screen)
Must be set here
(without System Manager).
Should be set here
(w/wo System Manager).
(Enter number from 0 to
255. First non-zero level
applies to all channels.)
PMU Power Level
(Site/Device Site Test
Parameters screen)
Can be re-configured here.
Enter number from 0 to
255. First non-zero level
applies to all channels.
Lower Alarm Limit
(Analog Input Channel
screen)
May temporarily be
configured here. Enter
number from 0.0 to 1000.
Different limits can be
configured for different
channels.
Single parameters that
define the following limits:
upper alarm limit for
transmitter output power
lower alarm limit for
antenna input power.
upper power limit for
antenna input power.
Other Pwr. Alarm Limits
(Analog Input Channel
screen)
Can be re-configured here.
Enter number from 0.0 to
1000. Different limits can
be configured for different
channels/antennas.
Single parameters that
define the upper and lower
SWR limits for the
antenna input.
SWR Alarm Limits
(Analog Pseudo Channel
screen)
Can be re-configured here.
Enter number from 0.00 to
9.99. Different limits can be
configured for different
antennas.
Antenna Mapping defines
which antenna is used by
each transmitter channel.
Antenna Channel
(Analog Input Channel
screen)
See text.