Filter
Top Products
Adding Parts 89
11 Carefully replace the front panel insert.
You do not need to replace the drive-bay cover panel.
12 Connect a power cable to the drive.
13 See the documentation that came with the drive for instructions on
connecting a drive cable to the drive.
HINT: Your computer
uses cable-select drive
cables. This means that
the device connected to
the end connector of the
drive cable is the master
device and the device
connected to the middle
connector is the slave
device. Be sure the jumper
setting on the new device
is set for "cable select"
(see the documentation
that came with the drive
for information).
tabs (2)
drive
drive bay
power cable
drive cable
9p915bk0.book Page 89 Thursday, April 4, 2002 9:26 AM