Filter
Top Products
Adding Parts 81
Adding a Second Hard Drive
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions listed in "When Working Inside Your
Computer" on page 12.
Your computer includes one hard drive. To add a second hard drive:
1 Shut down the computer (see page 20).
2 Turn off any attached devices and disconnect them from their
electrical outlets.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
3
Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.
4 Unpack the drive and prepare it for installation.
See the drive documentation to ensure that the drive is set up for your
computer.
5 Open the computer cover (see page 67).
card clip
lever
AGP card
AGP card clip
slot connector
back of computer
9p915bk0.book Page 81 Thursday, April 4, 2002 9:26 AM