Filter
Top Products
Adding Parts 75
HINT: Installing filler
brackets over empty card-
slot openings is necessary
to maintain Federal
Communications
Commission (FCC)
certification of the
computer. The brackets
also keep dust and dirt out
of your computer.
8
If you are not replacing the card, install a filler bracket in the empty
card-slot opening.
If you are adding a card, see page 71.
9 Lower the securing lever.
10 Close the computer cover (see page 90).
11 Connect your computer and devices to their electrical outlets, and
turn them on.
NOTICE: To connect a network cable, first plug the cable in to the network
wall jack and then plug it in to the computer.
Adding Memory
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions listed in "When Working Inside Your
Computer" on page 12.
You can increase your computer memory by installing memory modules on
the system board. For information on the type of memory supported by your
computer, see "Memory type" under "Memory" on page 93.
card
securing lever
slot connector
system board
filler bracket in empty
card-slot opening
back of computer
9p915bk0.book Page 75 Thursday, April 4, 2002 9:26 AM