Filter
Top Products
© 2006 Alamo Industrial
Index -1
Axtreme Boom - Asy Man (07/06)
INTRODUCTION
ABOUT THIS MANUAL:
The intent of this publications to provide the competent technician with the information necessary to assemble the
Alamo Industrial Product. This will, in turn provide for complete customer satisfaction. This manual is designed to be
used as a basic component guide. The assembly drawings shipped with the unit will be used as to the assembly of
components that are specific to a particular tractor model, these assembly drawings should always be kept with the
other product manuals for future reference.
It is hoped that the information contained in this and other Manuals will provide enough detail to eliminate the need
for contact of the Alamo Industrial Technical Service Dept. However, it should be understood that many instances may
arrive where in correspondence with the Manufacturer is necessary.
CONTACTING MANUFACTURER: (Please help us Help You! Before You Call! )
Alamo Industrial Service Staff Members are dedicated to helping you solve yours or your customer’s service problem
as quickly and efficiently as possible. Unfortunately, we receive entirely to many calls with only a minimum amount
of information. In some cases, the correspondent has never gone out to look at the equipment and merely calls inquiring
of the problems described to him by the operator or customer.
PART NUMBERS:
Part numbers listed in this manual are subject to change without notice as designs are made to adapt to the tractor
or for a design improvement. Before ordering parts ALWAYS Measure old part to make certain that is the one you will
need. This manual is designed to be used along with the Parts and Operators Manual.
Most calls received by Alamo Industrial Service can be classified into approx. 6 general categories.
1. Hydraulic or Mechanical Trouble Shooting.
2. Request for Technical Information or Specifications.
3. Mounting or Fitting Problem.
4. Special Service Problem.
5. Equipment Application Problems.
6. Tractor Problem Inquiries.
HOW YOU CAN HELP:
1. Make certain the call is necessary! Most of the calls received may not be necessary if the Dealer Service
Technician would do the following.
2. Check the Service Information at your Dealership provided by Alamo Industrial, This would include, Service
Bulletins, Information Bulletins, Parts Manuals, Operators Manuals or
Service Manuals, many of these are available via the Alamo Industrial Internet site (Alamo - Industrial. Com). Attempt
to diagnose or repair problem before calling.
3. If a call to Alamo Industrial is needed, Certain Information should be available and ready for the Alamo Industrial
Service Staff. Such information as, Machine Model, Serial Number, Your Dealer Name, Your Account Number and
Any other information that will be useful. This information is vital for the development of a prompt and correct solution
to the problem. This will also help to develop a database of problems and related solutions, which will expedite a solution
to future problems of a similar nature.
4. The technician may be asked to provide detailed information about the problem including the results of any
required trouble shooting techniques. If the information is not available, The technician may be asked to get the
information and call back. Most recommendations for repairs will be based on the procedures listed in the Service
Manual / Trouble Shooting Guide and the information as received from the dealer / customers. These recommendations
are based on the asumption that the proper testing and equipment inspections have been performed to determine the
repair needed.
CONTACT ALAMO INDUSTRIAL:
Alamo Industrial Inc.
1502 E. Walnut St. Seguin TX. 78155,
Technical Service Dept. PH: 830-379-1480