Filter
Top Products
© 2006 Alamo Group Inc.
Section 4 - 7
Axtreme Boom (Asy. Man) 07/06
Frame Installation:
1. Frame Components. The frame will include
the rear axle mounts, a LH & RH Frame rail. Two
front frame mounts, a LH & RH. One center frame
weldment. (See Figure 17, 18, 19, 20 & 21)
2. Install Frame Components. The Frame
components will only fit one way. The Frame com-
ponents are a Bolt together assembly no welding
will be required. The Frame components will bolt
together and to the tractor using mostly 3/4" and/or
20 mm bolts. Each 3/4" & 20 mm bolt will use
hardened flat washers, one on the head side when
bolts go into the tractor castings. Two washers
used when bolts use a nut and go through the
frame. These hardened washers are important.
Frame Installation
Figure 17
Figure 18
Figure 19
Figure 20
Figure 21
Center Frame
Weldment
LH Front Frame
Mount Weldment
RH Front Frame
Mount Weldment
RH Rear Frame
Mount Weldment
LH Rear Frame
Mount Weldment