Filter
Top Products
© 2006 Alamo Group Inc.
Section 4 - 2
Axtreme Boom (Asy. Man) 07/06
that will relocate the battery tray farther to the rear.
This is done so the Boom Swing will not hit battery
when in the transport position. The RH Step Will need
to be removed to allow access to relocate battery.
2. Remove Factory Battery Cover, Battery, Bat-
tery Tray and Battery Tray mount. (If Required, See
Assembly Drawings sent with unit) Remove the bat-
tery cover (See Figure 3), Remove the battery cables
from the battery. Remove the battery from the battery
tray. Unbolt the battery tray from the tractors factory
mount bracket. Remove the factory mounting bracket
from the tractor (See Figure 4).
3. Install Replacement Battery Tray Bracket (If
Required, See Assembly Drawings sent with unit).
Install the replacement battery tray bracket (See Fig-
ure 2) using the same bolts and holes as the original
bracket. This Bracket is designed to move battery
further back. Install original battery tray using original
hardware. Reinstall battery into batter tray (See Fig-
ure 3). DO NOT reconnect battery cables at this time,
leave them off and make certain they do not make
contact with the battery connections as you do not
want the battery connected during installation. Re-
place the battery cover (See Figure 1) for now this will
protect battery and cover.
Figure 1
Figure 2
Battery
Relocation
Bracket
Figure 3
Figure 4
Battery Holder Relocation
1. The Battery Relocation (If Required, See Assembly Drawings sent with unit). The battery holder is
located on the RH side of the tractor (See Figure 1) . It will have to be relocated. The mount kit will include
a battery relocation kit. The battery relocation kit includes a mounting bracket (See Figure 2)
Battery Holder Relocation: