Filter
Top Products
Operator Interface
152607 2–9
READ Menu
The READ Menu includes the following information:
• Current Operating State or Goal State
• Fault Code (if applicable)
• Inverter State
• Line Voltage and Current
• Inverter Matrix Temperature
• Inverter Power
•PV State
• PV Voltage and Current
• PV Power
• Grid Frequency
• Peak Power Tracker Enabled
Table 2-1 shows how the third and fourth line of the LCD will change as the
operator continues scrolling through the Menu. Table 2-2 on page 2–11 provides
a detailed description of R
EAD Menu operational values that are displayed on the
LCD.
To Display Any Operational Value in the READ Menu
From the Standard Display, use the /\ or \/ keys on the operator interface keypad
to scroll through the R
EAD Menu. The fourth line of the display will change to
display the appropriate information. See Table 2-1.
• The \/ key will scroll downward through the menu.
• The /\ key will scroll upward through the menu.
Upon reaching the end of the menu, it will go back to the beginning of the menu.
Table 2-1
Scrolling through the Read Menu Parameters
Read Menu Value Fourth Line of the LCD
Software Version (not shown) CCU Vx.xx FP V.x.x
Date/Time (not shown) Feb-14-2005 10:01:55
Read by ID# Value by ID#
Inverter A-B Volt INV A Volts:
Inverter B-C Volt INV B Volts:
Inverter C-A Volt INV C Volts:
Inverter A Current INV A Amps:
Inverter B Current INV B Amps:
Inverter C Current INV C Amps:
PV Voltage PV Volts:
PV Current PV Amps:
PV Power PV kW:
Grid Frequency Grid Freq:
PV PPT Enable PV PPT:
Ground Current Ground I:
Accumulated Power KWH: