Filter
Top Products
Specifications
A–2 152607
System Specifications
The PV225S has been designed for photovoltaic power systems, which operate
within the following specifications.
Environmental Specifications
The following environmental specifications are the same for both models of the
PV225S 225 kW Grid-Tied Photovoltaic Inverter.
CAUTION: Equipment Damage
Operation of the PV225S in a manner other than specified in this manual may cause
damage to the PV225S and other system components and will void the terms of the
warranty.
Table A-1
Environmental Specifications
Specification Value
Dimensions
Inverter and DC Interface
Transformer and AC Interface
Overall System Footprint:
Layout Option A
Layout Option B
88.5 in H x 80 in W x 32 in D (225 cm H x 203 cm W x 81 cm)
49.5 in H x 61.5 in W x 35.5 in D (126 cm H x 156 cm W x 90 cm D)
14 ft W x 5 ft L (approximate) (4.3 m x 1.5 m)
10 ft W x 9 ft L (approximate) (3 m W x 2.7 m L)
Weight
Inverter and DC Interface
Transformer and AC Interface
Overall Weight
2300 lbs (approximate)
2350 lbs (approximate)
4650 lbs (approximate)
Allowable Ambient Temperature
Operating
Storage
-20 °C to 50 °C Maximum
-40 °C to 50 °C Maximum
Relative Humidity To 95%, Non-condensing
Elevation Power Derated above 6600 ft
Clearance (ventilation and
serviceability)
In front of access doors: 36 in (91 cm)
In front of access panels: 36 in (91 cm)
Sides: 12 in (30 cm)
Back: 6 in (15 cm)
Maximum Distance between Main
Inverter Enclosure and AC Interface/
Transformer Enclosure
15 ft (4.5 m)