Filter
Top Products
II
Symptoms
A-9 Starting failure
Sparks do not come out from the tip
of the high voltage cord
A-10
Starting failure
Sparks do not come out or are weak
when the ignition plug is connected.
a
Ignition coil
L
Magneto
(Flywheel)
il
Ignition coil
plug cap
Contact failure
with the
ignition plug
Ignition plug
1. Insulation
failure
2. Carbon deposit
or dirt
E
Demagnetization
a
Air gap is too wide.
1. Breaking of wire
2. Short circuit
I
=I
I
Check the air gap
Measure resistance
valve between the
terminals with a
circuit tester
I
the ignition
Check
plug
Exchange the
magneto with a
new one and
restart it.
Checking
met hod
--
Check the ignition
Plug cap
In case contact
with the ignition
plug is not normal,
adjust or replace it.
I
I
-.
Checking
I
criteria
-
1. In case of insulation
failure, replace the
ignition plug.
2. In case of carborn
deposit or dirt, clean
or replace the ignition
plug.
In case the air gap
is too wide, adjust
it.
Normal : 0.5mm
In case of -S2 . . .
Breaking of wire
in case of OS1 . . .
Short circuit
In case of de-
magnetization,
replace it.
0
Remedies
Adjust the air gap