Filter
Top Products
Sequence ,
Part to ’
remove I
Description
I
Precautions
Necessary
tools
14 ‘Rotor
i (1) Insert a box spanner or a
1 Never insert a
/13 m/m box
socket wrench between the driver or other tools spanner or socket
wrench
I
through bolt and the rotor
into the fan of the
I
shaft, and hit it in a
rotor.
I
clockwise direction with a
I
hammer to loosen the
I
I
through bolt, thus keeping
a2 3 mm clearance be- 1
tween them.
(See Fig. 9-3-14)
I
,
’ (2) Hit the through bolt head
/ Never hit the slip : Plastic hammer
I
with a plastic hammer to
ring and the winding I
loosen the crank shaft and ’ sections. When hit-
!
i
the rotor shaft taper.
1 ting the through I
I
Then remove the rotor.
I bolt, hit it straight
I
(See Fig. 9-3-15)
[
I
j so as not to bend the ’
; bolt.
I
Through Bolt
Fig. 9-3- 13
siw‘ , ,_,
*
iI
L$z
2 .;I _
- ,ea
I=‘~ !jI-: ,~-’ ‘1
~-~~~i ~,
L
, il
,f!jF
Fi@. 9-3-14
F&. 9-3-15
-38-