Filter
Top Products
9.
DISASSEMBLY AND ASSEMBLY
9-l PREPARATION AND REMARKS
(1) Be sure to remember the locations of individual parts when disassembling the generator so
that the generator can be reassembled correctly. Tie tags with the necessary information
written in to facilitate easier and smoother reassembly.
(2) For more convenience, group the related parts and store them in the same box.
(3) To prevent bolts and nuts from being misplaced or installed incorrectly, place them
temporarily at their original positions.
(4) Handle the disassembled parts with care and clean them before reassembly using neutral
cleaning oil. (Be careful not to clean electric parts with neutral cleaning oil.)
(5) Use proper tools for disassembly/assembly.
9-2 SPECIAL TOOLS FOR DISASSEMBLY/ASSEMBLY
Fig 9-2
No. i Tool No. !
Tool name
Description
2099500407 1 Flywheel puller (with bolts)
For pulling out the flywheel
I
!
@ 1 2079500307 i
Valve spring retainer
For attaching valve spring,
retainer, retainer lock
I
2279500107 I
Valve guide puller
For pulling out the valve
i guide
I
,
-
28
-