Filter
Top Products
8-7 IGNITION COIL
Measure resistance in the coil of the ignition coil unit with a circuit tester.
!
Resistance (
I
Measurement location
13K!G?
i
Measure the resistance between the black cord and the high
tension cord.
Note:
The measured value does not always match the values shown in the table above
because of errors by the circuit tester, unevenness of coil winding, or peripheral
temperature.
8-8 EXCITING COIL
Measure resistance of the exciting coil and voltage at the rated rpm with a circuit tester.
Resistance value
( Voltage (AC) :
I
at rated rpm 1
Measurement location
I
I
10 Q 3ov ;
Between the terminals of the
I
i exciting coil
Note: The measured value does not always match the values shown in the table above,
because of errors by the circuit tester, unevenness of coil winding, or peripheral
temperature.
-
27
-