A SERVICE OF

logo

Introduction
General Printer Maintenance 9-19
Figure 9-8. Tune-Up Kit Components
7 Replace the component assemblies in this order:
Paper timing roller
Exit roller
Upper pick up roller
Lower pick up roller
Upper feed roller
Lower feed roller
Transfer charger
Lower static brush
Upper static brush
Upper paper guide roller
8 Perform the every-call cleaning procedure on page 7-6.
9 Plug in the printer and turn it on.
10 Run test prints to ensure that the paper feeds correctly through the printer.
11 Fill in the label with the date and meter count. Affix it inside the front cover next to
the printer’s serial number.