Filter
Top Products
Mount Installation 7
PN-46018 (3/15/02)
LOADER MOUNT INSTALLATION Cont’d
Figure 3
111868 Loader Mounting Kit
Remove Tractor Connector Tube or
Adapter Block
Follow this procedure only if using #40547 or
#46047 Hose Kits.
NOTE: It is easier to remove the connector tube or
adapter block before installing the right mount.
1. Remove tractor hydraulic line connector tube or
adapter block (if equipped) as shown in Figure 2.
2. To prevent the line from leaking during installation
of the loader mounts, be sure to plug the fitting. A 3/4”
plastic cap taken from an adapter in the hose kit may
be used.
Figure 2 Hydraulic connector Tube Removed
(Rear line capped with 3/4” plastic cap)
/,1(
&$33('
(1*,1( (1'
Grill Guard
1000545
RH Rear Mount
44490
LH Rear Mount
44491
Front Support
1002896
Crossmember
46000
RH Side Rail
59628
LH Side Rail
59631
Loader
Mounting
Instruction
Decal
56059
Spacer
Plate
46015
CD5612C-Var
Spacer
Plate
46015