Filter
Top Products
Hydraulic Installation 13
PN-46018 (Rev. 3/15/02)
#40542 Hose Kit Cont’d
Route Hoses & Install Hose Support
1. Route hydraulic hoses along loader mount, under
right side of fuel tank, and over the rear axle. Be sure
to avoid contact with 3-point linkage, brake pedals,
and other moveable tractor components.
IMPORTANT
■ Hoses must be routed so that they are not
pinched bent sharply, or chafed during operation.
Hoses must not interfere with any tractor control
operation or contact any moving parts.
2. Attach #40543 hose support to tractor fuel tank
support channel, using existing tractor hardware from
the fuel tank support channel. Route hoses through
hose support.
Figure 12 Hose Support Installed
1
+26(
6833257
+26(
6833257
)8(/ 7$1.
6833257 &+$11(/
$
%RRP
/LIW +RVHV
%XFNHW
&\OLQGHU +RVHV
A. 66511 1/2 NPT Quick coupler
(not included)
1. 315058 1/2 NPT x 3/4 JICF Adapter
2. 313053 1/2 NPT x 3/4 JICF Elbow
3. 313032 3/4 JICM x 3/4 JICF Elbow
4. 53670 3/8 x 150” Hose
Figure 13 Hose Fitting Identifications
Install Fittings to Hoses
1. Attach two adapters (1), 90-degree elbows (2), and
quick couplers A (not included), to boom cylinder hoses.
2. Attach two 90-degree elbows (2) and quick couplers
(not included) to bucket cylinder supply hoses.