Filter
Top Products
Hydraulic Installation 21
PN-46018 (Rev. 3/15/02)
3
#56038 Cable Control Kit & #46047 Hose Kit
(For cab tractors only)
Install Control Valve
(2-Spool #56038 or 3-Spool #56042)
1. Install valve assembly to valve guard, using three
3/8 x 1-1/2 carriage bolts (1), 3/8 lock washers (2),
and hex nuts (3).
2. Install valve/guard assembly to right loader
mount, using three 3/8 x 1-1/2 carriage bolts (1), 3/8
lock washers (2), and hex nuts (3).
3. For 3-spool valve only: Use two 3/8 x 3/4 car-
riage bolts (4) and lock nuts (5) to hold valve guard to
mounting shoe.
NOTE: Carriage bolts must be installed so that heads
are inside loader mount frame.
1. 301104 3/8 NC x 1-1/2 Carriage bolt
2. 838 3/8 Lock washer
3. 835 3/8 Hex nut
4. 24597 3/8 NC x 3/4 Carriage bolt
(for 3-spool valve only)
5. 14350 3/8 NC Flange lock nut
(for 3-spool valve only)
6. 56250 2-spool valve
or
6. 56270 3-spool valve
7. 46045 Valve guard
Figure 23 Valve Guard Assembly
CD5817
1
4
7
6
5
2
3