Filter
Top Products
10 Mount Installation
PN-46018 (Rev. 3/15/02)
LOADER MOUNT INSTALLATION Cont’d
Install Grill Guard
1. Install grill guard outside the left and right side
rails as shown in Figure 8.
5. 59628 Right side rail (not shown)
6. 59631 Left side rail
11. 57817 5/8 Hardened flat washer
12. 230 5/8 Hex nut
13. 4548 5/8 NC x 1-3/4 Cap screw
Figure 8 Grill Guard Installed
CD5612C-Var
13
11
12
6
Torque Hardware
1. Tighten all hardware to specifications given.
TORQUE SPECIFICATIONS
Wrench
Cap Screw Qty Size Required Torque
M12 x 1.25 x 80mm 2 18mm 76 lbs.-ft.(103 N-m)
M16 x 1.50 x 35mm 6 24mm 133 lbs.-ft.(181 N-m)
M18 x 1.50 x 85mm 2 27mm 194 lbs.-ft.(263 N-m)
M18 x 1.50 x 70mm 12 27mm 194 lbs.-ft.(263 N-m)
5/8 NC x 1-3/4 8 15/16” 170 lbs.-ft.(230 N-m)
5/8 NC x 2-1/4 12 15/16” 170 lbs.-ft.(230 N-m)