Filter
Top Products
Mount Installation 9
PN-46018 (3/15/02)
LOADER MOUNT INSTALLATION Cont’d
Install Front Mount Bracket
1. Install front mount bracket (3) to tractor steering
housing, using cap screws (17) and hardened flat
washers (11) as shown in Figure 6.
3. 1002896 Front mount bracket
11. 57817 5/8 Hardened flat washer
17. 307425 M16 x 1.5 x 35mm Cap screw
Figure 6 Front Mount Bracket
11
17
3
Install Side Rails
1. Install #59628 right side rail and #59631 left side
rail to outside of rear mounts as shown in Figure 7.
Secure with cap screws (13), hardened flat washers
(11), and hex nuts (12).
2. Secure at front support with cap screws (13), flat
washers (11), and hex nuts (12). Flat washers are
installed over the slot as shown below.
11. 57817 5/8 Hardened flat washer
12. 230 5/8 Hex nut
13. 4548 5/8 NC x 1-3/4 Cap screw
Figure 7 Side Rails Installed to Rear Mounts
& Front Support
/()7
/2$'(5
02817
13
11
12
13
11
12